Product Pictures

JPG Picture 1


JPG Picture 2

JPG Picture 3

pdf thumb

P412 - Brochure



CAD Drawings

PDF Technical Drawing

pdf thumb

DWG Technical Drawing


4 x 12” / 1.4", 2-way Horn Loaded Point Source

The P412 is a fully horn loaded point source system with four 12” neodymium transducers and a high precision 1.4” HF compression driver mounted onto a waveguide with 110° x 50° dispersion. The 12” transducers feature an extremely stiff UPM (Ultra Precision Membrane) carbon membrane design, which raises the particial oscillation to an inaccessible frequency range and reduces distortion to a minimum. The superior membrane damping is increased to a maximum, while natural oscillation is lowered to a smallest value. The UPM design further enables for increased speaker power capability of 3000 W (RMS). The P412 loudspeaker is designed to be driven in two way active mode with FIR filter technology by using the TX20 amplifier. The horn loaded coaxial speaker arrangement ensures a very precise horizontal and vertical coverage. The P412 can be used down to 60Hz. The acoustical and mechanical design enables arrays of up to three P412 modules among themselves. The cabinet is constructed from plywood and is covered with weather and impact protecting Polyurea coating. The front of the loudspeaker is protected by a robust metal front grill with acoustically transparent foam. The two sides are equipped with 3 handles. The P412 can be stacked or flown by using the optional Flybar. Ideal to use as FOH system, delay, frontfill or in high grade installations. Compatible to all P-Series Subwoofers.


4 x 12" Carbon Cone technology with 3" VC
1 x 1.4" HF compression driver with 4" VC
Airflow optimized front grill
110° x 50° nominal coverage
Outstanding performance at very high SPL
Fully horn loaded
16 x M8 rigging points
2 way FIR filter technology
Polyurea coating
Ergonomic grip handles
Ease Focus 3 Aiming Software

Technical Data



Frequency Range (-10dB) 60Hz - 20KHz
Frequency Response (+/- 3dB) 66Hz - 18KHz
Coverage Pattern 110° x 50°
HF Horn moulded CD Horn
Crossover Modes active with FIR DSP
Crossover Frequency 1 KHz
Power Rating Low 3.000 W / 6.000 W
Power Rating High 240 W / 480 W
Maximum SPL* 149.5 dB
System Sensitivity (1W/1m) 112 dB
LF Drivers 4 x custom made 12" Beyma© Carbon
 Neodymium Speaker, 3" VC
HF Driver 1 x custom made 1.4" B&C©
 Neodymium Comp. Driver, 4" VC
Nom. System Impedance 2 Ohms Low - 8 Ohms High
Ext. Tuning TX10 / TX20 DSP FIR, HDC48 FIR
Enclosure 15 mm Plywood
Rigging 18 x M8 nuts
 Optional C412 Cradle, Fly connectors
Transport 6 integrated handles, wheelboard
Finish Black Polyurea coating
Grille Powder coated, black, perforated
 steel with acoustic transparent
 charcoal foam backing
Input Connectors 1 x Neutrik© Speakon© NL4,
 1+/1- High, 2+/2- Low
Dimensions (WxHxD) 560 mm x 800 mm x 570 mm
Weight 60 kg