DXI 8200

8-channel power amplifier with SMPS

The DXI8200 is a 8-channel power amplifier at a compact size of 2 HU (rack spaces). The front panel shows 8 gain controls for easy access, 8 mute-switches and the main switch. The LED display informs about the condition of the amplifiers. The rear side shows 8 input-connectors and 8 output-connectors. The input sensivity (gain) is 32 dB each channel. The outputs offer barrier strip connectors. The DXI8200 can be used also in half-bridged mode (2 x 400 watts plus 4 x 200 watts RMS / 4 ohms). The DXI8200 can be switched into three different operation modes: stereo, parallel and bridge mode. The independent limiters can be switched on or off. The amplifier is equipped with a switch-on delay to protect the connected speakers.

► 8-channel power amplifier (8 x 200 watts RMS / 4 ohms)
► SMPS (switch mode power supply / 8 kg only)
► Compact design and lightweight construction
► Independent clip limiters
► Class-D technology for high efficiency
► Euroblock connectors at inputs
► Barrier strip connectors at outputs (cable-plugs included)
► Comprehensive package of safety circuits



CAD Drawings

PDF Technical Drawing

pdf thumb

User Manuals

PDF User Manual

pdf thumb

Product Pictures

JPG Picture 1


JPG Picture 2


130 (x 8)
200 (x 8)
400 (x 2 max. in bridge mode)
<0.5 %
<60 dB
40 k ohms bal. / 20 k ohms bal.
70 dB
Stereo / brigde / parallel
Barrier Strip (connectors included)
220 - 242 volts
1.300 W
483 x 89 x 431
544 x 123 x 544
8 kg / 10 kg

  8 ohms per channel (watt):
  4 ohms per channel (watt):
  8 ohms bridged (watt):
  THD+N at 1 kHz half power @ 4 ohms:
  Damping factor:
  Channel separation at 10 kHz:
  Input Impedance:
  Common mode rejection:
  Gain controls:
  Clip / protect indicators:
  Output headroom indicators:
  Input connectors:
  Link connectors:
  Mode switch:
  Limit switch:
  Output connectors:
  Operation voltage:
  Soft start:
  Switch mode power supply (SMPS)
  Maximum power consumption:
  Dimensions unit (mm) W x H x D:
  Dimensions packing (mm) W x H x D:
  Weight (net / gross):

DXI 8200


Safety circuits
The comprehensive package of safety circuits protects the connected speakers and periphery in case of trouble. All NOVA amplifiers are equipped with following safety circuits:

► Short circuit protection
A short cicuit in a speaker or cable could destroy the transistors of an amplfier. All NOVA amplifiers are equipped with a short circuit protection. This protects the amplifier from those damages.

► Overheating protection
All NOVA ampifiers are equipped with sensors at the transistors and transformers. Because of permanent monitoring of temperature the built-in fans make sure of sufficient cooling.

► HF protection
Extremely high frequencies could destroy the voice coils of the connected loudspeakers. All NOVA amplifiers are equipped with HF protection circuits and filters.

► DC protection
DC (direct current) at amplifiers output could destroy the voice coils of connected loudspeakers. All NOVA amplifiers are equipped with DC protection circuits, which avoid DC at the outputs of the amplifiers.


Select Series